For filling cavities
Insulation can be applied by injecting into existing building cavities. It is ideal for use as a renewal or additional insulation.
Do it yourself aplication
Insulation kit is suitable for do it yourself spray foam insulation projects.
The insulation is spray applied onto substrate to the desired location. It is ideal for new construction.
The open cell structure allows the penetration of moisture and vapor - diffusion-open. In wooden builds, for example, does not hold moisture causing mold.
prevent water transmition
The closed cell structure acts as a vapor barrier. This prevents the penetration of moisture into the insulation. Ideal for use, for example, basements, foundations, interior, exterior.
protection for polyurethane foam
Protects PUR foam against UV radiation and includes waterproofing layer.
for all types of roofs
Roofing foam is suitable for all types of roofs, eg. Concrete,sheet metal, asphalt tracks. Can be used even on existing roofs.
Allows easy cleaning without chemicals. Fast revitalization of the roof surface. Easy application.
for use on roofs
Roof polyurethane adhesive for bonding insulation boards.
use on walls, facades
Facade polyurethane adhesive for use in exterior and interior. Fast easy application.
Easy and quick installation
INSTASTIK saves time and money. For quick and easy installation does not require electricity, water or any special tools. Simply apply directly from the package.
For dry areas
Spray foam insulation is suitable for dry areas. Fully fills all gaps, creates an air barrier to prevent cold air penetration and subsequent condensation of water inside the building.
for wet areas
Spray foam insulation is suitable for wet areas such as cellars
EXY 39 - Especially suitable for exterior & interior - garage insulation, wall, ceiling and attic insulation, basement , foundation insulation, façade insulation, etc.
EXY 39 closed-cell spray foam insulation is one of the most efficient insulating materials commercially available. HONTER at 5cm and more acts as a vapour barrier, insulation and air barrier all in one.
EXY 39 Closed Cell Foam has a similar application process as EXY 09 Open Cell Foam it adheres directly to the substrate forming a seamless and permanent fill the gap and coverage over and around even the most difficult shapes. However, it only expands to 50 times its liquid volume it seals cracks and joints create air barrier and vapor barrier that remains for the life of the building. With one of the highest R-values per centimetr of any insulating material available.
EXY 39 Closed Cell Foam helps reduce energy costs while improving building comfort as well as indoor air quality and comfort, dust and other exterior pollutants cannot enter the building because of the continuous air tight seal.
EXY 39 Closed Cell Foam is also a green product with a unique formula that contains no ozone-depleting chemicals, such as CFCs, HCFCs, or fibres, formaldehyde and asbestos. No toxins are emitted after installation. And since it never decomposes or deteriorates, there are no concerns about harmful fibres or gases escaping into the air in the future. EXY 39 Closed Cell Foam also adds structural strength, and increases shear and racking strength by 300% to a building.
Area and conditions of use: Isulation foundations, facade insulation, ceiling insulation, wall insulation, floor insulation, basement, crosspace, roof insulation etc.
did you know ..?
The EXY 39 Closed Cell Foam at 5cm and more acts as a vapour barrier, insulation and air barrier all in one.
EXY 39 Closed-cell Foam
EXY 39 Closed-cell foam incorporates an insulating gas that is retained within the cells (foam "blowing agent"), which leads to the highly efficient insulating properties of the material. In addition, the EXY 39 closed-cell nature of this foam provides for a highly effective air barrier, low moisture vapor permeability (often referred to as the "Perm" rating), and excellent resistance to water. The most common foam density for closed-cell foam is approximately 41kg/m3. EXY 39 Closed-cell polyurethane foams are usually characterized by their rigidity and strength, in addition to the high R-Value. Also, studies show that wall racking strength can by doubled or tripled when EXY 39 closed cell foam is applied.
EXY 39 BENEFITS
- Excellent adhesion to substrate
- Energy savings of up to 70%
- Prevents thermal bridges
- It reduces or eliminates heat transfer through building structures
- Healthier living
- increases strength of the building by 300%
- excellent airtight and vapor barrier
- Reduces the cost of heating / cooling
- Does not support mold growth
|EXY 39||Test Method/Requirements||Value|
|R thermal resistance value at 100 mm thickness||4 (m2.W/K)|
|Thermal conductivity λ||ČSN EN 12667||0,0206 (W/m.K)|
|Declared value - coefficient of thermal conductivity λD||ČSN EN ISO 10456||0,022 (W/m.K)|
|The proposed value of the thermal conductivity λu||ČSN EN ISO 10456||0,023 (W/m.K)|
|Diffusion resistance coefficient δ||ČSN EN 12086||0,028|
|Diffusion resistance factor μ||ČSN EN 12086||25.2|
|Apparent density||ČSN EN 1602||41,5 (kg/m3)|
|Short term water absortion (24 hours)||ČSN EN 1609||0,131 (kg/m2)|
|Dimensional stability - width||ČSN EN 1604||-1,3 (%)|
|Dimensional stability - length||ČSN EN 1604||-1,4 (%)|
|Dimensional stability - thickness||ČSN EN 1604||-0,1 (%)|
|Reaction to fire||EN ISO 11925-2||Class E|
|Surface finish adhesion||ČSN 73 2577||0,14 (kPa)|
|Determination of compression behavior||ČSN EN 826||182,8 (kPa)|
|Determination of tensile strength perpendicular to faces||ČSN EN 1607||232,2 (kPa)|
|Reaction to fire classification||ČSN EN 13501-1+A1:2010||B-s1,d0|